X-Flow

solutions

Our extensive portfolio of filtration solutions guarantee the right specifications for each application. The Pentair X-Flow solutions are available for all water areas, from potable water production to the treatment of process and wastewater and the pre-treatment of seawater, but also for the food, beverage and pharmaceutical industries.

On this page you will find a total overview of our Pentair X-Flow solutions. To learn more about the features, typical use, scope and fields of application, click on 'view product'.
If you have any questions, please contact us.

Aquaflex

The ultrafiltration solution that can treat water containing up to 250 mg/l of total suspended solids, or 100 NTU turbidity. Specifically suited for industrial water treatment or direct drinking water production.

Aquaflex High solids

The Pentair X-Flow Aquaflex High Solids solution uses hollow-fiber or tubular UF in vertical dead-end configuration to remove high levels of suspended solids (TSS/MLSS of 200-1000 ppm), including algae, to produce high-quality water in a single process step.

X-line

A plug and play ultrafiltration (UF) solution with a capacity of 5-100 m3/h that combines a minimum footprint and maximum output through smart flow optimization.

Xiga

The Pentair X-Flow ultrafiltration solution with the highest membrane area-to-footprint ratio in the market. Specifically suited for large-scale (>10 mld) municipal or industrial water polishing for drinking water production or reuse.

Airlift

The Pentair X-Flow Airlift Solution was developed for treating (industrial) wastewater (<7,5MLD) with minimal energy consumption (<0.25 kWh/m3) and is suitable for suspended solids levels of MLSS 8-15 g/l.

Airlift Megablock

Pentiar X-Flow Airlift Megablock offers an energy-efficient and fully automated solution for large-scale (>7,5 MLD) industrial and municipal wastewater treatment and effluent that is suitable for direct discharge.

Crossflow

Pentair X-Flow Crossflow is developed for treating (industrial) wastewater with high TSS (up to 20g/l), at high flux rates of 80-150 l/m2h and suitable for capacities from 150-500m3/h (4-12 MLD).

Crossflow FFR

Crossflow FFR has been developed with the primary objective to have an easy and efficient process to deal with raw materials in the feed to membrane elements.

HFNANO

Drinking water production by retaining Natural Organic Matter (NOM) without coagulation and with minimal retention of hardness ions (calcium and magnesium).

Lineguard

To guarantee the quality and safety of water entering the building, by removing viruses (log 4) and bacteria (log 7) at a capacity of 60 l/min.

Pentair logo

As part of its separation into a new pure play water company, a new Pentair website has launched. Please visit the new Pentair.com to learn more about our exciting new company and your favorite brands!